Mostra notizie nelle discussioni
Avatar
Scritto da
Non Autenticato
il 2017-07-31 15:00:47.0 alle 2017-07-31 15:00:47.0
Re: Quando sei femminista ma tuo padre non è d'accordo
Scritto da: Nazi Heidi
> Immagine postata dall'utente

E tu cosa ne pensi?

falliti puppatemelo

Ad ilpupparuolo.com
puppa forte, puppa sempre‎
Avatar
Scritto da
Non Autenticato
il 2017-07-31 15:00:32.0 alle 2017-07-31 15:00:32.0
Re: Nazionalizzazione
Scritto da: dada216
> Scritto da: avvelentani
> > Scritto da: dada216
> > > Scritto da: avvelentani
> > > > E` interessante che Macron e` stato eletto come il salvatore del neoliberalismo ma nel giro di pochi mesi ha officializzato una statistica sull'immigrazione (l'80% degli immigrati sono migranti economici) che prima girava solo su sitacci e ora sta nazionalizzando imprese private come un comunista.
> > >
> > > la situazione in francia era pesante, pesantissima, si percepiva per la strada la tensione.
> > >
> > > **Modificato dall'autore il 31.07.2017 13:20**
> >
> > parrebbe di si`.
>
> l'ultima volta che ci sono passato era a meta' giugno, sono tornato da madrid a bologna in macchina ed 1km prima del confine con la francia ho cominciato a vedere code e polizia per la strada, incanalavano tutti i mezzi in colonne diverse a seconda del tipo, macchina, camion, autobus.
> Ogni singola persona e' stata controllata ed ogni singolo documento e' stato preso da una persona e guardato attentamente con una lente di ingrandimento digitale.
>
> quello era il confine, durante il tragitto vedi comunemente lo scanner per autostrade,cioe' questo montato su un camion.
>
> http://security.adanisystems.com/upload/iblock/023... li vedi fermarsi alle piazzole dove si parcheggiano i camion, far scendere gli autisti e scannare il camion a raggi x sul posto in meno di 15min.
>
> A cannes sono andato a prendermi un caffe' e fare una passeggiata e mi hanno fermato 2 volte,

Posta una foto di fronte e di profilo e ti diremo perché Cylon

> prima un poliziotto mi ha chiesto i documenti e che cosa stavo facendo, manco li ha guardati i documenti, poi qualche minuto dopo se ne e' avvicinato un altro, mi ha richiesto i documenti e poi fatto una foto con il suo cellulare, ha aspettato un po e poi mi ha detto che andava tutto bene, di farmi una bella vacanza, riconoscimento facciale? che dite.
>
> ecco mi pareva un po tesa la situazione.
>
> sotto sotto una parte di me pensava a tutta l'ingerenza dei francesi nel mondo arabo ed alle nostre relazioni con il mondo arabo.
>
> Chi fa lo stronzo s'aspetti di vivere di merda in futuro.
Avatar
Scritto da
Non Autenticato
il 2017-07-31 14:59:35.0 alle 2017-07-31 14:59:35.0
Re: Ordine
Scritto da:
> Come va la ricerca della signora Ordine?

Perché nessuno si interessa mai al mio stato sentimentale? In lacrime

Mattia
Avatar
Scritto da
Non Autenticato
il 2017-07-31 14:57:33.0 alle 2017-07-31 14:57:33.0
Re: Onesti cittadini esercitano la loro libertà di parola
Scritto da:
> Scritto da: dada216
> > Scritto da: Ordine
> > > Scritto da: dada216
> > > > Scritto da: Ordine
> > > > >
> > > > >
> > > > > ...
> > > > > tutti ricevono insulti sul web, io compreso ne ho dati e ricevuti, ma mai ho scritto e ricevuto un trattato.
> > > > >
> > > >
> > > > ¡mentiroso!
> > >
> > > "La Romania è ricchissima" Rotola dal ridere
> >
> > guarda che non sei piu' ricco di un rumeno, per niente.
> > non ti ho risposto l'altra volta per mancanza di interesse, ma e' ovvio che se mi prendi solo le statistiche sui pampini poveri allora un posto dove ci sono un sacco di zingari risultera' messo veramente male, e' uno degli elementi della loro cultura ed i loro pampini nelle statistiche risultano molto male.
> >
> > e' un po come misurare la ricchezza dell'italia e fattorializzarci dentro la legalita', abbassa non poco il valore della nostra ricchezza se ce lo metti dentro in qualche modo.
> >
> > in romania quei pampini che fanno la stessa cosa che fanno gli zingari da noi (scuola della strada, elemosina, etc..) quando cresceranno troveranno una economia in forte crescita, un lavoro (anche per chi non ha competenze particolarmente elevate visto che aprono ancora fabbriche li) e ci si compreranno una casa, se poi volesse fare l'imprenditore si troverebbe investimenti che arrivano da ogni dove (= vai in banca e ti danno soldi per fare qualunque cosa senza rompere troppo il cazzo).
> > Il figlio di un milanese benestante e' messo molto meglio, ma la stragrande maggioranza degli italiani non sono milanesi benestanti, tu ad esempio rischi di fare la fame da vecchio e vivere per la strada, e questo e' un rischio molto reale per quelli come te oggi.
> >
> > chi dei due e' piu' ricco?
>
> Già. Io ad esempio rischio di fare la fame e vivere in una baracca al terreno.

Si ma tu perché non hai fatto un cazzo per tua scelta. Idea!

Però ho sentito italiani che hanno lavorato per 45 anni e prendono pensioni misere.
Avatar
☺
Scritto da
il 2017-07-31 14:56:50.0 alle 2017-07-31 14:56:50.0
Trollate totali: 6374
Re: Nazionalizzazione
Scritto da: avvelentani
> Scritto da: dada216
> > Scritto da: avvelentani
> > > E` interessante che Macron e` stato eletto come il salvatore del neoliberalismo ma nel giro di pochi mesi ha officializzato una statistica sull'immigrazione (l'80% degli immigrati sono migranti economici) che prima girava solo su sitacci e ora sta nazionalizzando imprese private come un comunista.
> >
> > la situazione in francia era pesante, pesantissima, si percepiva per la strada la tensione.
> >
> > **Modificato dall'autore il 31.07.2017 13:20**
>
> parrebbe di si`.

l'ultima volta che ci sono passato era a meta' giugno, sono tornato da madrid a bologna in macchina ed 1km prima del confine con la francia ho cominciato a vedere code e polizia per la strada, incanalavano tutti i mezzi in colonne diverse a seconda del tipo, macchina, camion, autobus.
Ogni singola persona e' stata controllata ed ogni singolo documento e' stato preso da una persona e guardato attentamente con una lente di ingrandimento digitale.

quello era il confine, durante il tragitto vedi comunemente lo scanner per autostrade,cioe' questo montato su un camion.

http://security.adanisystems.com/upload/iblock/023... li vedi fermarsi alle piazzole dove si parcheggiano i camion, far scendere gli autisti e scannare il camion a raggi x sul posto in meno di 15min.

A cannes sono andato a prendermi un caffe' e fare una passeggiata e mi hanno fermato 2 volte, prima un poliziotto mi ha chiesto i documenti e che cosa stavo facendo, manco li ha guardati i documenti, poi qualche minuto dopo se ne e' avvicinato un altro, mi ha richiesto i documenti e poi fatto una foto con il suo cellulare, ha aspettato un po e poi mi ha detto che andava tutto bene, di farmi una bella vacanza, riconoscimento facciale? che dite.

ecco mi pareva un po tesa la situazione.

sotto sotto una parte di me pensava a tutta l'ingerenza dei francesi nel mondo arabo ed alle nostre relazioni con il mondo arabo.

Chi fa lo stronzo s'aspetti di vivere di merda in futuro.
Please consider the environment before printing this message, 50% of the above is useless!

EH?

Ad ehhhhhhjhhhhhhh.eh
EHH? EHHHH? EEEEHHHH? Aahhhhhhhh....‎
Avatar
Scritto da
Non Autenticato
il 2017-07-31 14:55:36.0 alle 2017-07-31 14:55:36.0
Re: nginx server block, aka virtualhosts + php-fpm unix socks = 403
Scritto da:
> Scritto da: dada216
> > Scritto da: ::1
> > > nginx da sempre 403 con fpm coi parametri di default.
> > > Definisci la root nel blocco server e usa questo (col path opportuno del socket):
> >
> > gia' fatto, leggendomi la docu ho capito che cosa fosse fastcgi_params ed fastcgi_split_path_info erano necessari per passare da index.php a far girare gli script con i nomi e gli argomenti giusti sul fpm.
> >
> > Il problema e' che non va comunque, 403 sulla porta di mediawiki, 200 su quella di wordpress.
> >
> > In lacrime
>
> Pappa pronta in arrivo tra tre, due, uno ...

SPLAT!
Avatar
Scritto da
Non Autenticato
il 2017-07-31 14:53:02.0 alle 2017-07-31 14:53:02.0
Re: ansible roles for hardening, standards for security?
Scritto da: dada216
> https://github.com/openstack/ansible-hardening
>
>
> The Security Technical Implementation Guide (STIG) for Red Hat Enterprise Linux (RHEL) 7 is in the final stages of release.
>
> The ansible-hardening Ansible role uses industry-standard security hardening guides to secure Linux hosts. Although the role is designed to work well in OpenStack environments that are deployed with OpenStack-Ansible, it can be used with almost any Linux system.
>
> It all starts with the Security Technical Implementation Guide (STIG) from the Defense Information Systems Agency (DISA), part of the United States Department of Defense. The guide is released with a public domain license and it is commonly used to secure systems at public and private organizations around the world.
>
> Each configuration from the STIG is analyzed to determine what impact it could have on a live production environment and how to implement it in Ansible. Tasks are added to the role that configure a host to meet the configuration requirement. Each task is documented to explain what was changed, why it was changed, and what deployers need to understand about the change.
>
> Deployers have the option to pick and choose which configurations are applied using Ansible variables and tags. Some tasks allow deployers to provide custom configurations to tighten down or relax certain requirements.

>
>
>
>
>
> mah, voi che dite? roba che server solo per ottenere il pezzo di carta che dice che sei sicuro e puoi lavorare con la banca (anche se poi ti hackerano lo stesso) oppure e' roba interessante per davvero?
>
>
> io mi sono aperto il ruolo ed ho dato una occhiata ai tasks ed a cosa fa, ci sono un botto di cose, queste sono le impostazioni del ruolo che ti permettono di settare in un file di conf del playbook, i task nel playbook poi fanno quello che imposti in questo file qui:
>
>
> 
> ## APT Cache Options
> # This variable is used across multiple OpenStack-Ansible roles to handle the
> # apt cache updates as efficiently as possible.
> cache_timeout: 600
> 
> # Set the package install state for distribution packages
> # Options are 'present' and 'latest'
> security_package_state: present
> 
> ## EPEL
> # Set the following variable to `no` to prevent the EPEL repository from being
> # installed by the role. This may prevent certain packages from installing,
> # such as ClamAV.
> security_epel_install_repository: yes
> #
> # Some deployers install a customized EPEL package that redirects servers to
> # their internal EPEL mirrors. Provide the name of the EPEL repository package
> # (epel-release by default on CentOS) or a URL to an EPEL release RPM file.
> security_epel_release_package: epel-release
> 
> ###############################################################################
> #  ____  _   _ _____ _       _____   ____ _____ ___ ____
> # |  _ \| | | | ____| |     |___  | / ___|_   _|_ _/ ___|
> # | |_) | |_| |  _| | |        / /  \___ \ | |  | | |  _
> # |  _ <|  _  | |___| |___    / /    ___) || |  | | |_| |
> # |_| \_\_| |_|_____|_____|  /_/    |____/ |_| |___\____|
> #
> # The following options are specific to the RHEL 7 STIG. For details on each
> # option, refer to the ansible-hardening documentation:
> #
> #   https://docs.openstack.org/ansible-hardening/latest/domains.html
> #
> ###############################################################################
> 
> ## Accounts (accounts)
> # Set minimum password lifetime to 1 day for interactive accounts.
> security_set_minimum_password_lifetime: no                   # V-71927
> security_set_maximum_password_lifetime: no                   # V-71931
> 
> ## AIDE (aide)
> # Initialize the AIDE database immediately (may take time).
> security_rhel7_initialize_aide: no                           # V-71973
> 
> ## Audit daemon (auditd)
> # Send audit records to a different system using audisp.
> #security_audisp_remote_server: '10.0.21.1'                  # V-72083
> # Encrypt audit records when they are transmitted over the network.
> #security_audisp_enable_krb5: yes                            # V-72085
> # Set the auditd failure flag. WARNING: READ DOCUMENTATION BEFORE CHANGING!
> security_rhel7_audit_failure_flag: 1                         # V-72081
> # Set the action to take when the disk is full or network events cannot be sent.
> security_rhel7_auditd_disk_full_action: syslog               # V-72087
> security_rhel7_auditd_network_failure_action: syslog         # V-72087
> # Size of remaining disk space (in MB) that triggers alerts.
> security_rhel7_auditd_space_left: "{{ (ansible_mounts | selectattr('mount', 'equalto', '/') | map(attribute='size_total') | first * 0.25 / 1024 / 1024) | int }}" # V-72089
> # Action to take when the space_left threshold is reached.
> security_rhel7_auditd_space_left_action: email               # V-72091
> # Send auditd email alerts to this user.
> security_rhel7_auditd_action_mail_acct: root                 # V-72093
> # Add audit rules for commands/syscalls.
> security_rhel7_audit_chsh: yes                               # V-72167
> security_rhel7_audit_chage: yes                              # V-72155
> security_rhel7_audit_chcon: yes                              # V-72139
> security_rhel7_audit_chmod: no                               # V-72105
> security_rhel7_audit_chown: no                               # V-72097
> security_rhel7_audit_creat: yes                              # V-72123
> security_rhel7_audit_crontab: yes                            # V-72183
> security_rhel7_audit_delete_module: yes                      # V-72189
> security_rhel7_audit_fchmod: no                              # V-72107
> security_rhel7_audit_fchmodat: no                            # V-72109
> security_rhel7_audit_fchown: no                              # V-72099
> security_rhel7_audit_fchownat: no                            # V-72103
> security_rhel7_audit_fremovexattr: no                        # V-72119
> security_rhel7_audit_fsetxattr: no                           # V-72113
> security_rhel7_audit_ftruncate: yes                          # V-72133
> security_rhel7_audit_init_module: yes                        # V-72187
> security_rhel7_audit_gpasswd: yes                            # V-72153
> security_rhel7_audit_lchown: no                              # V-72101
> security_rhel7_audit_lremovexattr: no                        # V-72121
> security_rhel7_audit_lsetxattr: no                           # V-72115
> security_rhel7_audit_mount: yes                              # V-72171
> security_rhel7_audit_newgrp: yes                             # V-72165
> security_rhel7_audit_open: yes                               # V-72125
> security_rhel7_audit_openat: yes                             # V-72127
> security_rhel7_audit_open_by_handle_at: yes                  # V-72129
> security_rhel7_audit_pam_timestamp_check: yes                # V-72185
> security_rhel7_audit_passwd: yes                             # V-72149
> security_rhel7_audit_postdrop: yes                           # V-72175
> security_rhel7_audit_postqueue: yes                          # V-72177
> security_rhel7_audit_pt_chown: yes                           # V-72181
> security_rhel7_audit_removexattr: no                         # V-72117
> security_rhel7_audit_rename: yes                             # V-72199
> security_rhel7_audit_renameat: yes                           # V-72201
> security_rhel7_audit_restorecon: yes                         # V-72141
> security_rhel7_audit_rmdir: yes                              # V-72203
> security_rhel7_audit_semanage: yes                           # V-72135
> security_rhel7_audit_setsebool: yes                          # V-72137
> security_rhel7_audit_setxattr: no                            # V-72111
> security_rhel7_audit_ssh_keysign: yes                        # V-72179
> security_rhel7_audit_su: yes                                 # V-72159
> security_rhel7_audit_sudo: yes                               # V-72161
> security_rhel7_audit_sudoedit: yes                           # V-72169
> security_rhel7_audit_truncate: yes                           # V-72131
> security_rhel7_audit_umount: yes                             # V-72173
> security_rhel7_audit_unix_chkpwd: yes                        # V-72151
> security_rhel7_audit_unlink: yes                             # V-72205
> security_rhel7_audit_unlinkat: yes                           # V-72207
> security_rhel7_audit_userhelper: yes                         # V-72157
> # Add audit rules for other events.
> security_rhel7_audit_account_access: yes                     # V-72143
> security_rhel7_audit_sudo_config_changes: yes                # V-72163
> security_rhel7_audit_insmod: yes                             # V-72191
> security_rhel7_audit_rmmod: yes                              # V-72193
> security_rhel7_audit_modprobe: yes                           # V-72195
> security_rhel7_audit_account_actions: yes                    # V-72197
> 
> ## Authentication (auth)
> # Disallow logins from accounts with blank/null passwords via PAM.
> security_disallow_blank_password_login: yes                  # V-71937
> # Apply password quality rules.
> # NOTE: The security_pwquality_apply_rules variable is a "master switch".
> # Set the 'security_pwquality_apply_rules' variable to 'yes' to apply all of
> # the password quality rules. Each rule can be disabled with a value of 'no'.
> security_pwquality_apply_rules: no
> security_pwquality_require_uppercase: yes                    # V-71903
> security_pwquality_require_lowercase: yes                    # V-71905
> security_pwquality_require_numeric: yes                      # V-71907
> security_pwquality_require_special: yes                      # V-71909
> security_pwquality_require_characters_changed: yes           # V-71911
> security_pwquality_require_character_classes_changed: yes    # V-71913
> security_pwquality_limit_repeated_characters: yes            # V-71915
> security_pwquality_limit_repeated_character_classes: yes     # V-71917
> security_pwquality_require_minimum_password_length: no       # V-71935
> # Use pwquality when passwords are changed or established.
> security_enable_pwquality_password_set: no                   # V-73159
> # Ensure passwords are stored using SHA512.
> security_password_encrypt_method: SHA512                     # V-71921
> # Ensure user/group admin utilities only store encrypted passwords.
> security_libuser_crypt_style_sha512: yes                     # V-71923
> # Set a minimum/maximum lifetime limit for user passwords.
> #security_password_min_lifetime_days: 1                      # V-71925
> #security_password_max_lifetime_days: 60                     # V-71929
> # Set a delay (in seconds) between failed login attempts.
> security_shadow_utils_fail_delay: 4                          # V-71951
> # Set a umask for all authenticated users.
> # security_shadow_utils_umask: '077'                         # V-71995
> # Create home directories for new users by default.
> security_shadow_utils_create_home: yes                       # V-72013
> # How many old user password to remember to prevent password re-use.
> #security_password_remember_password: 5                      # V-71933
> # Disable user accounts if the password expires.
> security_disable_account_if_password_expires: no             # V-71941
> # Lock user accounts with excessive login failures. See documentation.
> security_pam_faillock_enable: no                             # V-71945 / V-71943 / RHEL-07-010373
> security_pam_faillock_interval: 900
> security_pam_faillock_attempts: 3
> security_pam_faillock_deny_root: yes                         # RHEL-07-010373
> security_pam_faillock_unlock_time: 604800                    # V-71943
> # Limit the number of concurrent connections per account.
> #security_rhel7_concurrent_session_limit: 10                 # V-72217
> # Remove .shosts and shosts.equiv files.
> security_rhel7_remove_shosts_files: no                       # V-72277
> 
> ## File permissions (file_perms)
> # Reset file permissions and ownership for files installed via RPM packages.
> security_reset_perm_ownership: no                            # V-71849
> # Search for files/directories owned by invalid users or groups.
> security_search_for_invalid_owner: no                        # V-72007
> security_search_for_invalid_group_owner: no                  # V-72009
> # Set user/group owners on each home directory and set mode to 0750.
> security_set_home_directory_permissions_and_owners: no       # V-72017 / V-72019 / V-72021
> 
> ## Graphical interfaces (graphical)
> # Disable automatic gdm logins
> security_disable_gdm_automatic_login: yes                    # V-71953
> # Disable timed gdm logins for guests
> security_disable_gdm_timed_login: yes                        # V-71955
> # Enable session locking for graphical logins.
> security_lock_session: no                                    # V-71891
> # Set a timer (in seconds) when an inactive session is locked.
> security_lock_session_inactive_delay: 900                    # V-71893
> # Prevent users from modifying session lock settings.
> security_lock_session_override_user: yes                     # RHEL-07-010071
> # Lock a session (start screensaver) when a session is inactive.
> security_lock_session_when_inactive: yes                     # V-71893
> # Time after screensaver starts when user login is required.
> security_lock_session_screensaver_lock_delay: 5              # V-71901
> # Enable a login banner and set the text for the banner.
> security_enable_graphical_login_message: yes                 # V-71859
> security_enable_graphical_login_message_text: >
> You are accessing a secured system and your actions will be logged along
> with identifying information. Disconnect immediately if you are not an
> authorized user of this system.
> ## Linux Security Module (lsm)
> # Enable SELinux on Red Hat/CentOS and AppArmor on Ubuntu.
> security_rhel7_enable_linux_security_module: yes             # V-71989 / V-71991
> 
> ## Miscellaneous (misc)
> # Disable the autofs service.
> security_rhel7_disable_autofs: yes                           # V-71985
> # Enable virus scanning with clamav
> security_enable_virus_scanner: no                            # V-72213
> # Run the virus scanner update during the deployment (if scanner is deployed)
> security_run_virus_scanner_update: yes
> # Disable ctrl-alt-delete key sequence on the console.
> security_rhel7_disable_ctrl_alt_delete: yes                  # V-71993
> # Install and enable firewalld for iptables management.
> security_enable_firewalld: no                                # V-72273
> # Rate limit TCP connections to 25/min and burstable to 100.
> security_enable_firewalld_rate_limit: no                     # V-72271
> security_enable_firewalld_rate_limit_per_minute: 25
> security_enable_firewalld_rate_limit_burst: 100
> # Require authentication in GRUB to boot into single-user or maintenance modes.
> security_require_grub_authentication: no                     # V-71961 / V-71963
> # The default password for grub authentication is 'secrete'.
> security_grub_password_hash: grub.pbkdf2.sha512.10000.7B21785BEAFEE3AC71459D8210E3FB42EC0F5011C24A2DF31A8127D43A0BB4F1563549DF443791BE8EDA3AE4E4D4E04DB78D4CA35320E4C646CF38320CBE16EC.4B46176AAB1405D97BADB696377C29DE3B3266188D9C3D2E57F3AE851815CCBC16A275B0DBF6F79D738DAD8F598BEE64C73AE35F19A28C5D1E7C7D96FF8A739B
> # Set session timeout.
> security_rhel7_session_timeout: 600                          # V-72223
> # Enable chrony for NTP time synchronization.
> security_rhel7_enable_chrony: yes                            # V-72269
> # Restrict mail relaying.
> security_rhel7_restrict_mail_relaying: yes                   # V-72297
> # Deploy a login banner.                                     # V-72225 / V-71863
> security_login_banner_text: |
> ------------------------------------------------------------------------------
> * WARNING                                                                    *
> * You are accessing a secured system and your actions will be logged along   *
> * with identifying information. Disconnect immediately if you are not an     *
> * authorized user of this system.                                            *
> ------------------------------------------------------------------------------
> 
> 
> ## Packages (packages)
> # Remove packages from the system as required by the STIG. Set any of these
> # to 'no' to skip their removal.
> security_rhel7_remove_rsh_server: yes                        # V-71967
> security_rhel7_remove_telnet_server: yes                     # V-72077
> security_rhel7_remove_tftp_server: yes                       # V-72301
> security_rhel7_remove_xorg: yes                              # V-72307
> security_rhel7_remove_ypserv: yes                            # V-71969
> # Automatically remove dependencies when removing packages.
> security_package_clean_on_remove: no                         # V-71987
> # Automatically update packages.
> security_rhel7_automatic_package_updates: no                 # V-71999
> # Install packages for multi-factor authentication.
> security_install_multifactor_auth_packages: yes              # V-72417
> 
> ## RPM (rpm)
> # Enable GPG checks for packages and repository data.
> security_enable_gpgcheck_packages: yes                       # V-71977
> security_enable_gpgcheck_packages_local: yes                 # V-71979
> security_enable_gpgcheck_repo: no                            # V-71981
> 
> ## ssh server (sshd)
> # Ensure sshd is running and enabled at boot time.
> security_enable_sshd: yes                                    # V-72235
> # Disallow logins from users with empty/null passwords.
> security_sshd_disallow_empty_password: yes                   # V-71939 / RHEL-07-010440
> # Disallow users from overriding the ssh environment variables.
> security_sshd_disallow_environment_override: yes             # V-71957
> # Disallow host based authentication.
> security_sshd_disallow_host_based_auth: yes                  # V-71959
> # Set a list of allowed ssh ciphers.
> security_sshd_cipher_list: 'aes128-ctr,aes192-ctr,aes256-ctr' # V-72221
> # Specify a text file to be displayed as the banner/MOTD for all sessions.
> security_sshd_banner_file: /etc/motd                         # V-71861 / V-72225
> # Set the interval for max session length and the number of intervals to allow.
> security_sshd_client_alive_interval: 600                     # V-72237
> security_sshd_client_alive_count_max: 0                      # V-72241
> # Print the last login for a user when they log in over ssh.
> security_sshd_print_last_log: yes                            # V-72245
> # Permit direct root logins
> security_sshd_permit_root_login: no                          # V-72247
> # Disallow authentication using known hosts authentication.
> security_sshd_disallow_known_hosts_auth: yes                 # V-72249 / V-72239
> # Disallow rhosts authentication.
> security_sshd_disallow_rhosts_auth: yes                      # V-72243
> # Enable X11 forwarding.
> security_sshd_enable_x11_forwarding: yes                     # V-72303
> # Set the allowed ssh protocols.
> security_sshd_protocol: 2                                    # V-72251
> # Set the list of allowed Message Authentication Codes (MACs) for ssh.
> security_sshd_allowed_macs: 'hmac-sha2-256,hmac-sha2-512'    # V-72253
> # Disallow Generic Security Service Application Program Interface (GSSAPI) auth.
> security_sshd_disallow_gssapi: yes                           # V-72259
> # Disallow compression or delay after login.
> security_sshd_compression: 'delayed'                         # V-72267
> # Require privilege separation at every opportunity.
> security_sshd_enable_privilege_separation: yes               # V-72265
> # Require strict mode checking of home directory configuration files.
> security_sshd_enable_strict_modes: yes                       # V-72263
> # Disallow Kerberos authentication.
> security_sshd_disable_kerberos_auth: yes                     # V-72261
> 
> ## Kernel settings (kernel)
> # Disallow forwarding IPv4/IPv6 source routed packets on all interfaces
> # immediately and by default on new interfaces.
> security_disallow_source_routed_packet_forward_ipv4: yes     # V-72283 / V-72285
> security_disallow_source_routed_packet_forward_ipv6: yes     # V-72319
> # Disallow responses to IPv4 ICMP echoes sent to broadcast address.
> security_disallow_echoes_broadcast_address: yes              # V-72287
> # Disallow IPV4 ICMP redirects on all interfaces immediately and by default on
> # new interfaces.
> security_disallow_icmp_redirects: yes                        # V-73175 / V-72289 / V-72291 / V-72293
> # Disallow IP forwarding.
> security_disallow_ip_forwarding: no                          # V-72309
> # Disable USB storage support.
> security_rhel7_disable_usb_storage: yes                      # V-71983
> # Disable kdump.
> security_disable_kdump: yes                                  # V-72057
> 
> 
> ###############################################################################
> #   ____  _   _ _____ _        __     ____ _____ ___ ____
> #  |  _ \| | | | ____| |      / /_   / ___|_   _|_ _/ ___|
> #  | |_) | |_| |  _| | |     | '_ \  \___ \ | |  | | |  _
> #  |  _ <|  _  | |___| |___  | (_) |  ___) || |  | | |_| |
> #  |_| \_\_| |_|_____|_____|  \___/  |____/ |_| |___\____|
> #
> #  DEPRECATED! The RHEL 6 STIG content and its tasks were deprecated in the
> #  Ocata release and will be removed in a future release.
> #
> #  These configuration options apply to the RHEL 6 STIG content. Be sure to set
> #  `stig_version` to `rhel6` to use the tasks for the RHEL 6 STIG content.
> #
> ###############################################################################
> 
> ## AIDE
> # The default Ubuntu configuration for AIDE will cause it to wander into some
> # terrible places on the system, such as /var/lib/lxc and images in /opt.
> # The following three default exclusions are highly recommended for AIDE to
> # work properly, but additional exclusions can be added to this list if needed.
> security_aide_exclude_dirs:
> - /openstack
> - /opt
> - /run
> - /var
> #
> # By default, the AIDE database won't be initialized immediately since it can
> # consume plenty of CPU and I/O resources while it runs. To initialize the
> # AIDE database immediately when the playbook finishes, set the following
> # variable to 'true':
> security_initialize_aide: false
> 
> ## Audit daemon
> # V-38438 requires that auditd is enabled at boot time with a parameter in the
> # GRUB configuration.
> #
> # If 'security_enable_audit_during_boot' is set to 'yes', then the 'audit=1'
> # parameter will be added in /etc/default/grub.d/.
> # If 'security_enable_grub_update is set to 'yes', the grub.cfg will be
> # updated automatically.
> security_enable_audit_during_boot: yes            # V-38438
> security_enable_grub_update: yes                  # V-38438
> 
> # The following booleans control the rule sets added to auditd's default
> # set of auditing rules.  To see which rules will be added for each boolean,
> # refer to the templates/osas-auditd.j2 file.
> #
> # If the template changes due to booleans being adjusted, the new template
> # will be deployed onto the host and auditd will get the new rules loaded
> # automatically with augenrules.
> #
> security_audit_account_modification: yes          # V-38531, V-38534, V-38538
> security_audit_change_localtime: yes              # V-38530
> security_audit_change_system_time: yes            # V-38635
> security_audit_clock_settime: yes                 # V-38527
> security_audit_clock_settimeofday: yes            # V-38522
> security_audit_clock_stime: yes                   # V-38525
> security_audit_DAC_chmod: no                      # V-38543
> security_audit_DAC_chown: no                      # V-38545
> security_audit_DAC_lchown: no                     # V-38558
> security_audit_DAC_fchmod: no                     # V-38547
> security_audit_DAC_fchmodat: no                   # V-38550
> security_audit_DAC_fchown: no                     # V-38552
> security_audit_DAC_fchownat: no                   # V-38554
> security_audit_DAC_fremovexattr: no               # V-38556
> security_audit_DAC_lremovexattr: no               # V-38559
> security_audit_DAC_fsetxattr: no                  # V-38557
> security_audit_DAC_lsetxattr: no                  # V-38561
> security_audit_DAC_setxattr: no                   # V-38565
> security_audit_deletions: no                      # V-38575
> security_audit_failed_access: no                  # V-38566
> security_audit_filesystem_mounts: yes             # V-38568
> security_audit_kernel_modules: yes                # V-38580
> security_audit_mac_changes: yes                   # V-38541
> security_audit_network_changes: yes               # V-38540
> security_audit_sudoers: yes                       # V-38578
> #
> # **DANGER**
> # Changing the options below can cause systems to go offline unexpectedly or
> # stop serving requests as a security precaution. Read the developer notes for
> # each STIG prior to adjusting the following variables.
> # **DANGER**
> #
> # Set an action to occur when there is a disk error. Review the
> # documentation for V-38464 before changing this option.
> security_disk_error_action: SYSLOG                # V-38464
> #
> # Set an action to occur when the disk is full. Review the documentation for
> # V-38468 before changing this option.
> security_disk_full_action: SYSLOG                 # V-38468
> #
> # V-38678 - Set the amount of megabytes left when the space_left_action
> # triggers. The STIG guideline doesn't specify a size, but Ubuntu chooses a
> # default of 75MB, which is reasonable.
> security_space_left: 75                           # V-38678
> #
> # Set an action to occur when the disk is approaching its capacity.
> # Review the documentation for V-38470 before changing this option.
> security_space_left_action: SYSLOG                # V-38470
> #
> # Set the maximum size of a rotated log file. Ubuntu's default
> # matches the STIG requirement of 6MB.
> security_max_log_file: 6                          # V 38633
> #
> # Sets the action to take when log files reach the maximum file size.
> # Review the documentation for V-38634 before changing this option.
> security_max_log_file_action: ROTATE              # V-38634
> #
> # Set the number of rotated audit logs to keep.  Ubuntu has 5 as the default
> # and this matches the STIG's requirements.
> security_num_logs: 5                              # V-38636
> #
> # Set the email address of someone who can receive and respond to notifications
> # about low disk space for log volumes.
> security_action_mail_acct: root                   # V-38680
> #
> # **IMMINENT DANGER**
> # The STIG says that the system should switch to single user mode when the
> # storage capacity gets very low. This can cause serious service disruptions
> # and should only be set to 'single' for deployers in extremely high security
> # environments. Ubuntu's default is SUSPEND, which will suspend logging.
> # **IMMENENT DANGER**
> security_admin_space_left_action: SUSPEND         # V-54381
> 
> ## Chrony (NTP) configuration
> # Install and enable chrony to sync time with NTP servers.
> security_enable_chrony: yes                       # V-38620
> # Adjust the following NTP servers if necessary.
> security_ntp_servers:
> - 0.north-america.pool.ntp.org
> - 1.north-america.pool.ntp.org
> - 2.north-america.pool.ntp.org
> - 3.north-america.pool.ntp.org
> # Chrony limits access to clients that are on certain subnets.  Adjust the
> # following subnets here to limit client access to chrony servers.
> security_allowed_ntp_subnets:
> - 10/8
> - 192.168/16
> - 172.16/12
> # Listen for NTP requests only on local interfaces.
> security_ntp_bind_local_interfaces_only: yes
> 
> ## Core dumps
> # V-38675 requires disabling core dumps for all users unless absolutely
> # necessary. Set this variable to 'no' to skip this change.
> security_disable_core_dumps: yes                  # V-38675
> 
> ## Services
> # The STIG recommends ensuring that some services are running if no services
> # utilizing it are enabled.  Setting a boolean to 'yes' here will ensure that
> # a service isn't actively running and will not be started after boot-up.
> # Setting a 'no' will ensure that this Ansible role does not alter the service
> # in any way from its current configuration.
> #
> security_disable_abrtd: yes                       # V-38641
> security_disable_atd: yes                         # V-38640
> security_disable_autofs: yes                      # V-38437
> security_disable_avahi: yes                       # V-31618
> security_disable_bluetooth: yes                   # V-38691
> security_disable_netconsole: yes                  # v-38672
> security_disable_qpidd: yes                       # V-38648
> security_disable_rdisc: yes                       # V-38650
> security_disable_rsh: yes                         # V-38594
> security_disable_ypbind: yes                      # V-38604
> security_disable_xinetd: yes                      # V-38582
> #
> # The STIG recommends ensuring that some services aren't installed at ANY time.
> # Those services are listed here.  Setting a boolean here to 'yes' wiil
> # ensure that the STIG is followed and the service is removed.  Setting a
> # boolean to 'no' means that the playbook will not alter the service.
> #
> security_remove_ldap_server: yes                  # V-38627
> security_remove_rsh_server: yes                   # V-38591
> security_remove_sendmail: yes                     # V-38671
> security_remove_telnet_server: yes                # V-38587
> security_remove_tftp_server: yes                  # V-38606
> security_remove_xinetd: yes                       # V-38584
> security_remove_xorg: yes                         # v-38676
> security_remove_ypserv: yes                       # V-38603
> #
> # The STIG does not allow the system to run a graphical interface. Set this
> # variable to 'no' if you need a graphical interface on the server.
> security_disable_x_windows: yes                   # V-38674
> 
> ## SSH configuration
> # The following configuration items will adjust how the ssh daemon is
> # configured.  The recommendations from the RHEL 6 STIG are shown below, but
> # they can be adjusted to fit a particular environment.
> #
> # Set a 15 minute time out for SSH sessions if there is no activity
> security_ssh_client_alive_interval: 900           # V-38608
> #
> # Timeout ssh sessions as soon as ClientAliveInterval is reached once
> security_ssh_client_alive_count_max: 0            # V-38610
> #
> # The ssh daemon must not permit root logins. The default value of 'yes' is a
> # deviation from the STIG requirements due to how openstack-ansible operates,
> # especially within OpenStack CI gate jobs. See documentation for V-38613 for
> # more details.
> security_ssh_permit_root_login: 'yes'             # V-38613
> 
> ## Kernel
> # Set these booleans to 'yes' to disable the kernel module (following the
> # STIG requirements). Set the boolean to 'no' to ensure no changes are made.
> security_disable_module_bluetooth: yes            # V-38682
> security_disable_module_dccp: yes                 # V-38514
> security_disable_module_rds: yes                  # V-38516
> security_disable_module_sctp: yes                 # V-38515
> security_disable_module_tipc: yes                 # V-38517
> security_disable_module_usb_storage: no           # V-38490
> security_disable_icmpv4_redirects: no             # V-38524
> security_disable_icmpv4_redirects_secure: no      # V-38526
> security_disable_icmpv6_redirects: no             # V-38548
> #
> # ** DANGER **
> # It's strongly recommended to fully understand the effects of changing the
> # following sysctl tunables. Refer to the documentation under 'Developer
> # Notes' for each of the STIGs below before making any changes.
> # ** DANGER **
> #
> security_sysctl_enable_tcp_syncookies: yes        # V-38539
> security_sysctl_enable_martian_logging: no        # V-38528
> #
> # Deployers who wish to disable IPv6 entirely must set this configuration
> # variable to 'yes'. See the documentation for V-38546 before making this
> # change.
> security_disable_ipv6: no                         # V-38546
> 
> # Sets the global challenge ACK counter to a large value such
> # that a potential attacker could not reasonably come up against it.
> security_set_tcp_challenge_ack_limit: yes    # CVE-2016-5696

> [CUT]

> ## sudo
> # V-58901 requires that 'NOPASSWD' and '!authenticate' do not appear in any
> # sudoers files since they could lead to a compromise. Set the following
> # variables to 'yes' to comment out any lines found with these prohibited
> # parameters or leave them set to 'no' (the default) to leave sudoers files
> # unaltered. Deployers are urged to review the documentation for this STIG
> # before making changes.
> security_sudoers_remove_nopasswd: no              # V-58901
> security_sudoers_remove_authenticate: no          # V-58901
> 
> ## umask settings
> # The STIG recommends changing various default umask settings for users and
> # daemons via different methods. However, this could cause serious issues for
> # production OpenStack environements which haven't been tested with these
> # changes.
> #
> # The variables below are set to match the STIG requirements, but they are
> # commented out to ensure they require deployers to opt-in for each change. To
> # opt in for one of the changes below, simply uncomment the line and run the
> # playbook. Deployers are strongly advised to review the documentation for
> # these changes and review their systems to ensure these changes won't cause
> # service disruptions.
> #
> # V-38642 - Set umask for daemons in init scripts to 027 or 022
> #security_umask_daemons_init: 027                 # V-38642
> #
> # V-38645 - System default umask in /etc/login.defs must be 077
> #security_umask_login_defs: 077                   # V-38645
> #
> # V-38649 - System default umask for csh must be 077
> #security_umask_csh: 077                          # V-38649
> #
> # V-38651 - System default umask for bash must be 077
> #security_umask_bash: 077                         # V-38651
> 
> ## Unattended upgrades (APT) configuration
> security_unattended_upgrades_enabled: false
> security_unattended_upgrades_notifications: false
> 
> 
> 
> 


I minimal working examples di dada sono come i suoi post Perplesso
Avatar
☺
Buco del culo
Scritto da
Alessandrox
(XYZ)Troll
il 2017-07-31 14:50:29.0 alle 2017-07-31 14:50:29.0
Trollate totali: 11585
Re: RH (e di conseguenza derivati) sono impestati da codice CIA NSAbile?
Scritto da:
> Scritto da: Alessandrox
> > Bene!
> >
> > Se posso identificare il buco del culo di linux, posso starne alla larga A bocca aperta Occhiolino
>
> Alla larga da linucs o da RHEL?

RHEL e derivati
Ma smettila di secernere cazzate!
Avatar
Scritto da
Non Autenticato
il 2017-07-31 14:48:57.0 alle 2017-07-31 14:48:57.0
Re: Onesti cittadini esercitano la loro libertà di parola
Scritto da: dada216
> Scritto da: Ordine
> > Scritto da: dada216
> > > Scritto da: Ordine
> > > >
> > > >
> > > > ...
> > > > tutti ricevono insulti sul web, io compreso ne ho dati e ricevuti, ma mai ho scritto e ricevuto un trattato.
> > > >
> > >
> > > ¡mentiroso!
> >
> > "La Romania è ricchissima" Rotola dal ridere
>
> guarda che non sei piu' ricco di un rumeno, per niente.
> non ti ho risposto l'altra volta per mancanza di interesse, ma e' ovvio che se mi prendi solo le statistiche sui pampini poveri allora un posto dove ci sono un sacco di zingari risultera' messo veramente male, e' uno degli elementi della loro cultura ed i loro pampini nelle statistiche risultano molto male.
>
> e' un po come misurare la ricchezza dell'italia e fattorializzarci dentro la legalita', abbassa non poco il valore della nostra ricchezza se ce lo metti dentro in qualche modo.
>
> in romania quei pampini che fanno la stessa cosa che fanno gli zingari da noi (scuola della strada, elemosina, etc..) quando cresceranno troveranno una economia in forte crescita, un lavoro (anche per chi non ha competenze particolarmente elevate visto che aprono ancora fabbriche li) e ci si compreranno una casa, se poi volesse fare l'imprenditore si troverebbe investimenti che arrivano da ogni dove (= vai in banca e ti danno soldi per fare qualunque cosa senza rompere troppo il cazzo).
> Il figlio di un milanese benestante e' messo molto meglio, ma la stragrande maggioranza degli italiani non sono milanesi benestanti, tu ad esempio rischi di fare la fame da vecchio e vivere per la strada, e questo e' un rischio molto reale per quelli come te oggi.
>
> chi dei due e' piu' ricco?

Già. Io ad esempio rischio di fare la fame e vivere in una baracca al terreno.

MaCheCCazzoVuoi?

Ad cazzituoi.org
FattiICazziTuoi‎
Avatar
☺
Scritto da
avvelentani
Cubicolario
il 2017-07-31 14:26:58.0 alle 2017-07-31 14:26:58.0
Trollate totali: 18184
Re: Nazionalizzazione
Scritto da: dada216
> Scritto da: avvelentani
> > E` interessante che Macron e` stato eletto come il salvatore del neoliberalismo ma nel giro di pochi mesi ha officializzato una statistica sull'immigrazione (l'80% degli immigrati sono migranti economici) che prima girava solo su sitacci e ora sta nazionalizzando imprese private come un comunista.
>
> la situazione in francia era pesante, pesantissima, si percepiva per la strada la tensione.
>
> **Modificato dall'autore il 31.07.2017 13:20**

parrebbe di si`.
I think happiness is love
- Vladimir Putin
Avatar
☺
Scritto da
il 2017-07-31 14:16:17.0 alle 2017-07-31 14:16:17.0
Trollate totali: 4032
Re: Ordine
Scritto da:
> Come va la ricerca della signora Ordine?

Dal vivo zero. Sul web ci provo, ma purtroppo conta solo il bel faccino e se non hai un viso da 7,5/8 non hai alcuna speranza sul web.
"Se tutti facessero così..."

"La Romania è ricchissima" cit. Dada
Avatar
☺
Scritto da
il 2017-07-31 14:08:03.0 alle 2017-07-31 14:08:03.0
Trollate totali: 6374
Re: Onesti cittadini esercitano la loro libertà di parola
Scritto da: Ordine
> Scritto da: dada216
> > Scritto da: Ordine
> > >
> > >
> > > ...
> > > tutti ricevono insulti sul web, io compreso ne ho dati e ricevuti, ma mai ho scritto e ricevuto un trattato.
> > >
> >
> > ¡mentiroso!
>
> "La Romania è ricchissima" Rotola dal ridere

guarda che non sei piu' ricco di un rumeno, per niente.
non ti ho risposto l'altra volta per mancanza di interesse, ma e' ovvio che se mi prendi solo le statistiche sui pampini poveri allora un posto dove ci sono un sacco di zingari risultera' messo veramente male, e' uno degli elementi della loro cultura ed i loro pampini nelle statistiche risultano molto male.

e' un po come misurare la ricchezza dell'italia e fattorializzarci dentro la legalita', abbassa non poco il valore della nostra ricchezza se ce lo metti dentro in qualche modo.

in romania quei pampini che fanno la stessa cosa che fanno gli zingari da noi (scuola della strada, elemosina, etc..) quando cresceranno troveranno una economia in forte crescita, un lavoro (anche per chi non ha competenze particolarmente elevate visto che aprono ancora fabbriche li) e ci si compreranno una casa, se poi volesse fare l'imprenditore si troverebbe investimenti che arrivano da ogni dove (= vai in banca e ti danno soldi per fare qualunque cosa senza rompere troppo il cazzo).
Il figlio di un milanese benestante e' messo molto meglio, ma la stragrande maggioranza degli italiani non sono milanesi benestanti, tu ad esempio rischi di fare la fame da vecchio e vivere per la strada, e questo e' un rischio molto reale per quelli come te oggi.

chi dei due e' piu' ricco?
Please consider the environment before printing this message, 50% of the above is useless!
Avatar
☺
Scritto da
il 2017-07-31 13:19:52.0 alle 2017-07-31 13:19:52.0
Trollate totali: 6374
Re: Nazionalizzazione
Scritto da: avvelentani
> E` interessante che Macron e` stato eletto come il salvatore del neoliberalismo ma nel giro di pochi mesi ha officializzato una statistica sull'immigrazione (l'80% degli immigrati sono migranti economici) che prima girava solo su sitacci e ora sta nazionalizzando imprese private come un comunista.

la situazione in francia era pesante, pesantissima, si percepiva per la strada la tensione.

**Modificato dall'autore il 31.07.2017 13:20**
Please consider the environment before printing this message, 50% of the above is useless!

Arricchimento culturale in Svezia in corso

Ad https://www.breitbart.com/europe/2019/01/04/patient-placed-in-quarantine-after-suspected-ebola-case-in-sweden/
The Emergency Room of a Swedish hospital was closed down Friday morning after a patient recently returned from Africa arrived vomiting blood, a possible symptom of the deadly and contagious Ebola virus.‎
Avatar
☺
Scritto da
il 2017-07-31 13:07:03.0 alle 2017-07-31 13:07:03.0
Trollate totali: 6374
ansible roles for hardening, standards for security?
https://github.com/openstack/ansible-hardening


The Security Technical Implementation Guide (STIG) for Red Hat Enterprise Linux (RHEL) 7 is in the final stages of release.

The ansible-hardening Ansible role uses industry-standard security hardening guides to secure Linux hosts. Although the role is designed to work well in OpenStack environments that are deployed with OpenStack-Ansible, it can be used with almost any Linux system.

It all starts with the Security Technical Implementation Guide (STIG) from the Defense Information Systems Agency (DISA), part of the United States Department of Defense. The guide is released with a public domain license and it is commonly used to secure systems at public and private organizations around the world.

Each configuration from the STIG is analyzed to determine what impact it could have on a live production environment and how to implement it in Ansible. Tasks are added to the role that configure a host to meet the configuration requirement. Each task is documented to explain what was changed, why it was changed, and what deployers need to understand about the change.

Deployers have the option to pick and choose which configurations are applied using Ansible variables and tags. Some tasks allow deployers to provide custom configurations to tighten down or relax certain requirements.






mah, voi che dite? roba che server solo per ottenere il pezzo di carta che dice che sei sicuro e puoi lavorare con la banca (anche se poi ti hackerano lo stesso) oppure e' roba interessante per davvero?


io mi sono aperto il ruolo ed ho dato una occhiata ai tasks ed a cosa fa, ci sono un botto di cose, queste sono le impostazioni del ruolo che ti permettono di settare in un file di conf del playbook, i task nel playbook poi fanno quello che imposti in questo file qui:


## APT Cache Options
# This variable is used across multiple OpenStack-Ansible roles to handle the
# apt cache updates as efficiently as possible.
cache_timeout: 600

# Set the package install state for distribution packages
# Options are 'present' and 'latest'
security_package_state: present

## EPEL
# Set the following variable to `no` to prevent the EPEL repository from being
# installed by the role. This may prevent certain packages from installing,
# such as ClamAV.
security_epel_install_repository: yes
#
# Some deployers install a customized EPEL package that redirects servers to
# their internal EPEL mirrors. Provide the name of the EPEL repository package
# (epel-release by default on CentOS) or a URL to an EPEL release RPM file.
security_epel_release_package: epel-release

###############################################################################
#  ____  _   _ _____ _       _____   ____ _____ ___ ____
# |  _ \| | | | ____| |     |___  | / ___|_   _|_ _/ ___|
# | |_) | |_| |  _| | |        / /  \___ \ | |  | | |  _
# |  _ <|  _  | |___| |___    / /    ___) || |  | | |_| |
# |_| \_\_| |_|_____|_____|  /_/    |____/ |_| |___\____|
#
# The following options are specific to the RHEL 7 STIG. For details on each
# option, refer to the ansible-hardening documentation:
#
#   https://docs.openstack.org/ansible-hardening/latest/domains.html
#
###############################################################################

## Accounts (accounts)
# Set minimum password lifetime to 1 day for interactive accounts.
security_set_minimum_password_lifetime: no                   # V-71927
security_set_maximum_password_lifetime: no                   # V-71931

## AIDE (aide)
# Initialize the AIDE database immediately (may take time).
security_rhel7_initialize_aide: no                           # V-71973

## Audit daemon (auditd)
# Send audit records to a different system using audisp.
#security_audisp_remote_server: '10.0.21.1'                  # V-72083
# Encrypt audit records when they are transmitted over the network.
#security_audisp_enable_krb5: yes                            # V-72085
# Set the auditd failure flag. WARNING: READ DOCUMENTATION BEFORE CHANGING!
security_rhel7_audit_failure_flag: 1                         # V-72081
# Set the action to take when the disk is full or network events cannot be sent.
security_rhel7_auditd_disk_full_action: syslog               # V-72087
security_rhel7_auditd_network_failure_action: syslog         # V-72087
# Size of remaining disk space (in MB) that triggers alerts.
security_rhel7_auditd_space_left: "{{ (ansible_mounts | selectattr('mount', 'equalto', '/') | map(attribute='size_total') | first * 0.25 / 1024 / 1024) | int }}" # V-72089
# Action to take when the space_left threshold is reached.
security_rhel7_auditd_space_left_action: email               # V-72091
# Send auditd email alerts to this user.
security_rhel7_auditd_action_mail_acct: root                 # V-72093
# Add audit rules for commands/syscalls.
security_rhel7_audit_chsh: yes                               # V-72167
security_rhel7_audit_chage: yes                              # V-72155
security_rhel7_audit_chcon: yes                              # V-72139
security_rhel7_audit_chmod: no                               # V-72105
security_rhel7_audit_chown: no                               # V-72097
security_rhel7_audit_creat: yes                              # V-72123
security_rhel7_audit_crontab: yes                            # V-72183
security_rhel7_audit_delete_module: yes                      # V-72189
security_rhel7_audit_fchmod: no                              # V-72107
security_rhel7_audit_fchmodat: no                            # V-72109
security_rhel7_audit_fchown: no                              # V-72099
security_rhel7_audit_fchownat: no                            # V-72103
security_rhel7_audit_fremovexattr: no                        # V-72119
security_rhel7_audit_fsetxattr: no                           # V-72113
security_rhel7_audit_ftruncate: yes                          # V-72133
security_rhel7_audit_init_module: yes                        # V-72187
security_rhel7_audit_gpasswd: yes                            # V-72153
security_rhel7_audit_lchown: no                              # V-72101
security_rhel7_audit_lremovexattr: no                        # V-72121
security_rhel7_audit_lsetxattr: no                           # V-72115
security_rhel7_audit_mount: yes                              # V-72171
security_rhel7_audit_newgrp: yes                             # V-72165
security_rhel7_audit_open: yes                               # V-72125
security_rhel7_audit_openat: yes                             # V-72127
security_rhel7_audit_open_by_handle_at: yes                  # V-72129
security_rhel7_audit_pam_timestamp_check: yes                # V-72185
security_rhel7_audit_passwd: yes                             # V-72149
security_rhel7_audit_postdrop: yes                           # V-72175
security_rhel7_audit_postqueue: yes                          # V-72177
security_rhel7_audit_pt_chown: yes                           # V-72181
security_rhel7_audit_removexattr: no                         # V-72117
security_rhel7_audit_rename: yes                             # V-72199
security_rhel7_audit_renameat: yes                           # V-72201
security_rhel7_audit_restorecon: yes                         # V-72141
security_rhel7_audit_rmdir: yes                              # V-72203
security_rhel7_audit_semanage: yes                           # V-72135
security_rhel7_audit_setsebool: yes                          # V-72137
security_rhel7_audit_setxattr: no                            # V-72111
security_rhel7_audit_ssh_keysign: yes                        # V-72179
security_rhel7_audit_su: yes                                 # V-72159
security_rhel7_audit_sudo: yes                               # V-72161
security_rhel7_audit_sudoedit: yes                           # V-72169
security_rhel7_audit_truncate: yes                           # V-72131
security_rhel7_audit_umount: yes                             # V-72173
security_rhel7_audit_unix_chkpwd: yes                        # V-72151
security_rhel7_audit_unlink: yes                             # V-72205
security_rhel7_audit_unlinkat: yes                           # V-72207
security_rhel7_audit_userhelper: yes                         # V-72157
# Add audit rules for other events.
security_rhel7_audit_account_access: yes                     # V-72143
security_rhel7_audit_sudo_config_changes: yes                # V-72163
security_rhel7_audit_insmod: yes                             # V-72191
security_rhel7_audit_rmmod: yes                              # V-72193
security_rhel7_audit_modprobe: yes                           # V-72195
security_rhel7_audit_account_actions: yes                    # V-72197

## Authentication (auth)
# Disallow logins from accounts with blank/null passwords via PAM.
security_disallow_blank_password_login: yes                  # V-71937
# Apply password quality rules.
# NOTE: The security_pwquality_apply_rules variable is a "master switch".
# Set the 'security_pwquality_apply_rules' variable to 'yes' to apply all of
# the password quality rules. Each rule can be disabled with a value of 'no'.
security_pwquality_apply_rules: no
security_pwquality_require_uppercase: yes                    # V-71903
security_pwquality_require_lowercase: yes                    # V-71905
security_pwquality_require_numeric: yes                      # V-71907
security_pwquality_require_special: yes                      # V-71909
security_pwquality_require_characters_changed: yes           # V-71911
security_pwquality_require_character_classes_changed: yes    # V-71913
security_pwquality_limit_repeated_characters: yes            # V-71915
security_pwquality_limit_repeated_character_classes: yes     # V-71917
security_pwquality_require_minimum_password_length: no       # V-71935
# Use pwquality when passwords are changed or established.
security_enable_pwquality_password_set: no                   # V-73159
# Ensure passwords are stored using SHA512.
security_password_encrypt_method: SHA512                     # V-71921
# Ensure user/group admin utilities only store encrypted passwords.
security_libuser_crypt_style_sha512: yes                     # V-71923
# Set a minimum/maximum lifetime limit for user passwords.
#security_password_min_lifetime_days: 1                      # V-71925
#security_password_max_lifetime_days: 60                     # V-71929
# Set a delay (in seconds) between failed login attempts.
security_shadow_utils_fail_delay: 4                          # V-71951
# Set a umask for all authenticated users.
# security_shadow_utils_umask: '077'                         # V-71995
# Create home directories for new users by default.
security_shadow_utils_create_home: yes                       # V-72013
# How many old user password to remember to prevent password re-use.
#security_password_remember_password: 5                      # V-71933
# Disable user accounts if the password expires.
security_disable_account_if_password_expires: no             # V-71941
# Lock user accounts with excessive login failures. See documentation.
security_pam_faillock_enable: no                             # V-71945 / V-71943 / RHEL-07-010373
security_pam_faillock_interval: 900
security_pam_faillock_attempts: 3
security_pam_faillock_deny_root: yes                         # RHEL-07-010373
security_pam_faillock_unlock_time: 604800                    # V-71943
# Limit the number of concurrent connections per account.
#security_rhel7_concurrent_session_limit: 10                 # V-72217
# Remove .shosts and shosts.equiv files.
security_rhel7_remove_shosts_files: no                       # V-72277

## File permissions (file_perms)
# Reset file permissions and ownership for files installed via RPM packages.
security_reset_perm_ownership: no                            # V-71849
# Search for files/directories owned by invalid users or groups.
security_search_for_invalid_owner: no                        # V-72007
security_search_for_invalid_group_owner: no                  # V-72009
# Set user/group owners on each home directory and set mode to 0750.
security_set_home_directory_permissions_and_owners: no       # V-72017 / V-72019 / V-72021

## Graphical interfaces (graphical)
# Disable automatic gdm logins
security_disable_gdm_automatic_login: yes                    # V-71953
# Disable timed gdm logins for guests
security_disable_gdm_timed_login: yes                        # V-71955
# Enable session locking for graphical logins.
security_lock_session: no                                    # V-71891
# Set a timer (in seconds) when an inactive session is locked.
security_lock_session_inactive_delay: 900                    # V-71893
# Prevent users from modifying session lock settings.
security_lock_session_override_user: yes                     # RHEL-07-010071
# Lock a session (start screensaver) when a session is inactive.
security_lock_session_when_inactive: yes                     # V-71893
# Time after screensaver starts when user login is required.
security_lock_session_screensaver_lock_delay: 5              # V-71901
# Enable a login banner and set the text for the banner.
security_enable_graphical_login_message: yes                 # V-71859
security_enable_graphical_login_message_text: >
    You are accessing a secured system and your actions will be logged along
    with identifying information. Disconnect immediately if you are not an
    authorized user of this system.
## Linux Security Module (lsm)
# Enable SELinux on Red Hat/CentOS and AppArmor on Ubuntu.
security_rhel7_enable_linux_security_module: yes             # V-71989 / V-71991

## Miscellaneous (misc)
# Disable the autofs service.
security_rhel7_disable_autofs: yes                           # V-71985
# Enable virus scanning with clamav
security_enable_virus_scanner: no                            # V-72213
# Run the virus scanner update during the deployment (if scanner is deployed)
security_run_virus_scanner_update: yes
# Disable ctrl-alt-delete key sequence on the console.
security_rhel7_disable_ctrl_alt_delete: yes                  # V-71993
# Install and enable firewalld for iptables management.
security_enable_firewalld: no                                # V-72273
# Rate limit TCP connections to 25/min and burstable to 100.
security_enable_firewalld_rate_limit: no                     # V-72271
security_enable_firewalld_rate_limit_per_minute: 25
security_enable_firewalld_rate_limit_burst: 100
# Require authentication in GRUB to boot into single-user or maintenance modes.
security_require_grub_authentication: no                     # V-71961 / V-71963
# The default password for grub authentication is 'secrete'.
security_grub_password_hash: grub.pbkdf2.sha512.10000.7B21785BEAFEE3AC71459D8210E3FB42EC0F5011C24A2DF31A8127D43A0BB4F1563549DF443791BE8EDA3AE4E4D4E04DB78D4CA35320E4C646CF38320CBE16EC.4B46176AAB1405D97BADB696377C29DE3B3266188D9C3D2E57F3AE851815CCBC16A275B0DBF6F79D738DAD8F598BEE64C73AE35F19A28C5D1E7C7D96FF8A739B
# Set session timeout.
security_rhel7_session_timeout: 600                          # V-72223
# Enable chrony for NTP time synchronization.
security_rhel7_enable_chrony: yes                            # V-72269
# Restrict mail relaying.
security_rhel7_restrict_mail_relaying: yes                   # V-72297
# Deploy a login banner.                                     # V-72225 / V-71863
security_login_banner_text: |
  ------------------------------------------------------------------------------
  * WARNING                                                                    *
  * You are accessing a secured system and your actions will be logged along   *
  * with identifying information. Disconnect immediately if you are not an     *
  * authorized user of this system.                                            *
  ------------------------------------------------------------------------------


## Packages (packages)
# Remove packages from the system as required by the STIG. Set any of these
# to 'no' to skip their removal.
security_rhel7_remove_rsh_server: yes                        # V-71967
security_rhel7_remove_telnet_server: yes                     # V-72077
security_rhel7_remove_tftp_server: yes                       # V-72301
security_rhel7_remove_xorg: yes                              # V-72307
security_rhel7_remove_ypserv: yes                            # V-71969
# Automatically remove dependencies when removing packages.
security_package_clean_on_remove: no                         # V-71987
# Automatically update packages.
security_rhel7_automatic_package_updates: no                 # V-71999
# Install packages for multi-factor authentication.
security_install_multifactor_auth_packages: yes              # V-72417

## RPM (rpm)
# Enable GPG checks for packages and repository data.
security_enable_gpgcheck_packages: yes                       # V-71977
security_enable_gpgcheck_packages_local: yes                 # V-71979
security_enable_gpgcheck_repo: no                            # V-71981

## ssh server (sshd)
# Ensure sshd is running and enabled at boot time.
security_enable_sshd: yes                                    # V-72235
# Disallow logins from users with empty/null passwords.
security_sshd_disallow_empty_password: yes                   # V-71939 / RHEL-07-010440
# Disallow users from overriding the ssh environment variables.
security_sshd_disallow_environment_override: yes             # V-71957
# Disallow host based authentication.
security_sshd_disallow_host_based_auth: yes                  # V-71959
# Set a list of allowed ssh ciphers.
security_sshd_cipher_list: 'aes128-ctr,aes192-ctr,aes256-ctr' # V-72221
# Specify a text file to be displayed as the banner/MOTD for all sessions.
security_sshd_banner_file: /etc/motd                         # V-71861 / V-72225
# Set the interval for max session length and the number of intervals to allow.
security_sshd_client_alive_interval: 600                     # V-72237
security_sshd_client_alive_count_max: 0                      # V-72241
# Print the last login for a user when they log in over ssh.
security_sshd_print_last_log: yes                            # V-72245
# Permit direct root logins
security_sshd_permit_root_login: no                          # V-72247
# Disallow authentication using known hosts authentication.
security_sshd_disallow_known_hosts_auth: yes                 # V-72249 / V-72239
# Disallow rhosts authentication.
security_sshd_disallow_rhosts_auth: yes                      # V-72243
# Enable X11 forwarding.
security_sshd_enable_x11_forwarding: yes                     # V-72303
# Set the allowed ssh protocols.
security_sshd_protocol: 2                                    # V-72251
# Set the list of allowed Message Authentication Codes (MACs) for ssh.
security_sshd_allowed_macs: 'hmac-sha2-256,hmac-sha2-512'    # V-72253
# Disallow Generic Security Service Application Program Interface (GSSAPI) auth.
security_sshd_disallow_gssapi: yes                           # V-72259
# Disallow compression or delay after login.
security_sshd_compression: 'delayed'                         # V-72267
# Require privilege separation at every opportunity.
security_sshd_enable_privilege_separation: yes               # V-72265
# Require strict mode checking of home directory configuration files.
security_sshd_enable_strict_modes: yes                       # V-72263
# Disallow Kerberos authentication.
security_sshd_disable_kerberos_auth: yes                     # V-72261

## Kernel settings (kernel)
# Disallow forwarding IPv4/IPv6 source routed packets on all interfaces
# immediately and by default on new interfaces.
security_disallow_source_routed_packet_forward_ipv4: yes     # V-72283 / V-72285
security_disallow_source_routed_packet_forward_ipv6: yes     # V-72319
# Disallow responses to IPv4 ICMP echoes sent to broadcast address.
security_disallow_echoes_broadcast_address: yes              # V-72287
# Disallow IPV4 ICMP redirects on all interfaces immediately and by default on
# new interfaces.
security_disallow_icmp_redirects: yes                        # V-73175 / V-72289 / V-72291 / V-72293
# Disallow IP forwarding.
security_disallow_ip_forwarding: no                          # V-72309
# Disable USB storage support.
security_rhel7_disable_usb_storage: yes                      # V-71983
# Disable kdump.
security_disable_kdump: yes                                  # V-72057


###############################################################################
#   ____  _   _ _____ _        __     ____ _____ ___ ____
#  |  _ \| | | | ____| |      / /_   / ___|_   _|_ _/ ___|
#  | |_) | |_| |  _| | |     | '_ \  \___ \ | |  | | |  _
#  |  _ <|  _  | |___| |___  | (_) |  ___) || |  | | |_| |
#  |_| \_\_| |_|_____|_____|  \___/  |____/ |_| |___\____|
#
#  DEPRECATED! The RHEL 6 STIG content and its tasks were deprecated in the
#  Ocata release and will be removed in a future release.
#
#  These configuration options apply to the RHEL 6 STIG content. Be sure to set
#  `stig_version` to `rhel6` to use the tasks for the RHEL 6 STIG content.
#
###############################################################################

## AIDE
# The default Ubuntu configuration for AIDE will cause it to wander into some
# terrible places on the system, such as /var/lib/lxc and images in /opt.
# The following three default exclusions are highly recommended for AIDE to
# work properly, but additional exclusions can be added to this list if needed.
security_aide_exclude_dirs:
  - /openstack
  - /opt
  - /run
  - /var
#
# By default, the AIDE database won't be initialized immediately since it can
# consume plenty of CPU and I/O resources while it runs. To initialize the
# AIDE database immediately when the playbook finishes, set the following
# variable to 'true':
security_initialize_aide: false

## Audit daemon
# V-38438 requires that auditd is enabled at boot time with a parameter in the
# GRUB configuration.
#
# If 'security_enable_audit_during_boot' is set to 'yes', then the 'audit=1'
# parameter will be added in /etc/default/grub.d/.
# If 'security_enable_grub_update is set to 'yes', the grub.cfg will be
# updated automatically.
security_enable_audit_during_boot: yes            # V-38438
security_enable_grub_update: yes                  # V-38438

# The following booleans control the rule sets added to auditd's default
# set of auditing rules.  To see which rules will be added for each boolean,
# refer to the templates/osas-auditd.j2 file.
#
# If the template changes due to booleans being adjusted, the new template
# will be deployed onto the host and auditd will get the new rules loaded
# automatically with augenrules.
#
security_audit_account_modification: yes          # V-38531, V-38534, V-38538
security_audit_change_localtime: yes              # V-38530
security_audit_change_system_time: yes            # V-38635
security_audit_clock_settime: yes                 # V-38527
security_audit_clock_settimeofday: yes            # V-38522
security_audit_clock_stime: yes                   # V-38525
security_audit_DAC_chmod: no                      # V-38543
security_audit_DAC_chown: no                      # V-38545
security_audit_DAC_lchown: no                     # V-38558
security_audit_DAC_fchmod: no                     # V-38547
security_audit_DAC_fchmodat: no                   # V-38550
security_audit_DAC_fchown: no                     # V-38552
security_audit_DAC_fchownat: no                   # V-38554
security_audit_DAC_fremovexattr: no               # V-38556
security_audit_DAC_lremovexattr: no               # V-38559
security_audit_DAC_fsetxattr: no                  # V-38557
security_audit_DAC_lsetxattr: no                  # V-38561
security_audit_DAC_setxattr: no                   # V-38565
security_audit_deletions: no                      # V-38575
security_audit_failed_access: no                  # V-38566
security_audit_filesystem_mounts: yes             # V-38568
security_audit_kernel_modules: yes                # V-38580
security_audit_mac_changes: yes                   # V-38541
security_audit_network_changes: yes               # V-38540
security_audit_sudoers: yes                       # V-38578
#
# **DANGER**
# Changing the options below can cause systems to go offline unexpectedly or
# stop serving requests as a security precaution. Read the developer notes for
# each STIG prior to adjusting the following variables.
# **DANGER**
#
# Set an action to occur when there is a disk error. Review the
# documentation for V-38464 before changing this option.
security_disk_error_action: SYSLOG                # V-38464
#
# Set an action to occur when the disk is full. Review the documentation for
# V-38468 before changing this option.
security_disk_full_action: SYSLOG                 # V-38468
#
# V-38678 - Set the amount of megabytes left when the space_left_action
# triggers. The STIG guideline doesn't specify a size, but Ubuntu chooses a
# default of 75MB, which is reasonable.
security_space_left: 75                           # V-38678
#
# Set an action to occur when the disk is approaching its capacity.
# Review the documentation for V-38470 before changing this option.
security_space_left_action: SYSLOG                # V-38470
#
# Set the maximum size of a rotated log file. Ubuntu's default
# matches the STIG requirement of 6MB.
security_max_log_file: 6                          # V 38633
#
# Sets the action to take when log files reach the maximum file size.
# Review the documentation for V-38634 before changing this option.
security_max_log_file_action: ROTATE              # V-38634
#
# Set the number of rotated audit logs to keep.  Ubuntu has 5 as the default
# and this matches the STIG's requirements.
security_num_logs: 5                              # V-38636
#
# Set the email address of someone who can receive and respond to notifications
# about low disk space for log volumes.
security_action_mail_acct: root                   # V-38680
#
# **IMMINENT DANGER**
# The STIG says that the system should switch to single user mode when the
# storage capacity gets very low. This can cause serious service disruptions
# and should only be set to 'single' for deployers in extremely high security
# environments. Ubuntu's default is SUSPEND, which will suspend logging.
# **IMMENENT DANGER**
security_admin_space_left_action: SUSPEND         # V-54381

## Chrony (NTP) configuration
# Install and enable chrony to sync time with NTP servers.
security_enable_chrony: yes                       # V-38620
# Adjust the following NTP servers if necessary.
security_ntp_servers:
  - 0.north-america.pool.ntp.org
  - 1.north-america.pool.ntp.org
  - 2.north-america.pool.ntp.org
  - 3.north-america.pool.ntp.org
# Chrony limits access to clients that are on certain subnets.  Adjust the
# following subnets here to limit client access to chrony servers.
security_allowed_ntp_subnets:
  - 10/8
  - 192.168/16
  - 172.16/12
# Listen for NTP requests only on local interfaces.
security_ntp_bind_local_interfaces_only: yes

## Core dumps
# V-38675 requires disabling core dumps for all users unless absolutely
# necessary. Set this variable to 'no' to skip this change.
security_disable_core_dumps: yes                  # V-38675

## Services
# The STIG recommends ensuring that some services are running if no services
# utilizing it are enabled.  Setting a boolean to 'yes' here will ensure that
# a service isn't actively running and will not be started after boot-up.
# Setting a 'no' will ensure that this Ansible role does not alter the service
# in any way from its current configuration.
#
security_disable_abrtd: yes                       # V-38641
security_disable_atd: yes                         # V-38640
security_disable_autofs: yes                      # V-38437
security_disable_avahi: yes                       # V-31618
security_disable_bluetooth: yes                   # V-38691
security_disable_netconsole: yes                  # v-38672
security_disable_qpidd: yes                       # V-38648
security_disable_rdisc: yes                       # V-38650
security_disable_rsh: yes                         # V-38594
security_disable_ypbind: yes                      # V-38604
security_disable_xinetd: yes                      # V-38582
#
# The STIG recommends ensuring that some services aren't installed at ANY time.
# Those services are listed here.  Setting a boolean here to 'yes' wiil
# ensure that the STIG is followed and the service is removed.  Setting a
# boolean to 'no' means that the playbook will not alter the service.
#
security_remove_ldap_server: yes                  # V-38627
security_remove_rsh_server: yes                   # V-38591
security_remove_sendmail: yes                     # V-38671
security_remove_telnet_server: yes                # V-38587
security_remove_tftp_server: yes                  # V-38606
security_remove_xinetd: yes                       # V-38584
security_remove_xorg: yes                         # v-38676
security_remove_ypserv: yes                       # V-38603
#
# The STIG does not allow the system to run a graphical interface. Set this
# variable to 'no' if you need a graphical interface on the server.
security_disable_x_windows: yes                   # V-38674

## SSH configuration
# The following configuration items will adjust how the ssh daemon is
# configured.  The recommendations from the RHEL 6 STIG are shown below, but
# they can be adjusted to fit a particular environment.
#
# Set a 15 minute time out for SSH sessions if there is no activity
security_ssh_client_alive_interval: 900           # V-38608
#
# Timeout ssh sessions as soon as ClientAliveInterval is reached once
security_ssh_client_alive_count_max: 0            # V-38610
#
# The ssh daemon must not permit root logins. The default value of 'yes' is a
# deviation from the STIG requirements due to how openstack-ansible operates,
# especially within OpenStack CI gate jobs. See documentation for V-38613 for
# more details.
security_ssh_permit_root_login: 'yes'             # V-38613

## Kernel
# Set these booleans to 'yes' to disable the kernel module (following the
# STIG requirements). Set the boolean to 'no' to ensure no changes are made.
security_disable_module_bluetooth: yes            # V-38682
security_disable_module_dccp: yes                 # V-38514
security_disable_module_rds: yes                  # V-38516
security_disable_module_sctp: yes                 # V-38515
security_disable_module_tipc: yes                 # V-38517
security_disable_module_usb_storage: no           # V-38490
security_disable_icmpv4_redirects: no             # V-38524
security_disable_icmpv4_redirects_secure: no      # V-38526
security_disable_icmpv6_redirects: no             # V-38548
#
# ** DANGER **
# It's strongly recommended to fully understand the effects of changing the
# following sysctl tunables. Refer to the documentation under 'Developer
# Notes' for each of the STIGs below before making any changes.
# ** DANGER **
#
security_sysctl_enable_tcp_syncookies: yes        # V-38539
security_sysctl_enable_martian_logging: no        # V-38528
#
# Deployers who wish to disable IPv6 entirely must set this configuration
# variable to 'yes'. See the documentation for V-38546 before making this
# change.
security_disable_ipv6: no                         # V-38546

# Sets the global challenge ACK counter to a large value such
# that a potential attacker could not reasonably come up against it.
security_set_tcp_challenge_ack_limit: yes    # CVE-2016-5696

## Mail
# The STIG requires inet_interfaces to be set to 'localhost', but Ubuntu will
# configure it to be 'all' when dpkg-reconfigure is unavailable (as it is when
# Ansible installs packages). The default here is 'localhost' to meet the STIG
# requirement, but some deployers may want this set to 'all' if their hosts
# need to receive emails over the network (which isn't common).
#
# See the documentation for V-38622 for more details.
security_postfix_inet_interfaces: localhost       # V-38622
#
# Configuring an email address here will cause hosts to forward the root user's
# email to another address.
#
#security_root_forward_email: user@example.com

## Linux Security Module (LSM)
# AppArmor and SELinux provide powerful security controls on a Linux system
# by setting policies for allowed actions. By setting the following variable
# to true, the appropriate LSM will be enabled for the Linux distribution:
#
#    Ubuntu: AppArmor
#    CentOS: SELinux
#
# See the ansible-hardening documentation for more details.
security_enable_linux_security_module: yes        # V-51337

## PAM and authentication
# V-38497 requires that accounts with null passwords aren't allowed to
# authenticate via PAM. Ubuntu 14.04's default allows these logins -- see the
# documentation for V-38497 for more details. Set the variable below to 'yes'
# to remove 'nullok_secure' from the PAM configuration or set it to 'no' to
# leave the PAM configuration unaltered.
security_pam_remove_nullok: yes                   # V-38497
#
# V-38501 requires that failed login attempts must lock a user account using
# pam_faillock, but Ubuntu doesn't package that PAM module. Instead, fail2ban
# can be installed to lock out IP addresses with failed logins for 15 minutes.
# Set the variable below to 'yes' to install and configure fail2ban.
security_install_fail2ban: no                     # V-38501
#
# The STIG requires bans to last 15 minutes. Adjust the following variable
# to set the time an IP is banned by fail2ban (in seconds).
security_fail2ban_bantime: 900                    # V-38501

## Password complexity and aging
# V-38475 - There is no password length requirement by default in Ubuntu 14.04.
# To set a password length requirement, uncomment
# security_password_minimum_length below. The STIG recommendation is 14
# characters.
#security_password_minimum_length: 14             # V-38475
# V-38477 - There is no password change limitation set by default in Ubuntu. To
# set the minimum number of days between password changes, uncomment the
# security_password_minimum_days variable below.  The STIG recommendation is 1
# day.
#security_password_minimum_days: 1                # V-38477
# V-38479 - There is no age limit on password by default in Ubuntu. Uncomment
# line below to use the STIG recommendation of 60 days.
#security_password_maximum_days: 60               # V-38479
# V-38480 - To warn users before their password expires, uncomment the line
# below and they will be warned 7 days prior (following the STIG).
#security_password_warn_age: 7                    # V-38480
# V-38684 - Setting the maximum number of simultaneous logins per user. The
# STIG sets a limit of 10.
#security_max_simultaneous_logins: 10             # V-38684
# V-38692 - Lock accounts that are inactive for 35 days.
#security_inactive_account_lock_days: 35          # V-38692

## sudo
# V-58901 requires that 'NOPASSWD' and '!authenticate' do not appear in any
# sudoers files since they could lead to a compromise. Set the following
# variables to 'yes' to comment out any lines found with these prohibited
# parameters or leave them set to 'no' (the default) to leave sudoers files
# unaltered. Deployers are urged to review the documentation for this STIG
# before making changes.
security_sudoers_remove_nopasswd: no              # V-58901
security_sudoers_remove_authenticate: no          # V-58901

## umask settings
# The STIG recommends changing various default umask settings for users and
# daemons via different methods. However, this could cause serious issues for
# production OpenStack environements which haven't been tested with these
# changes.
#
# The variables below are set to match the STIG requirements, but they are
# commented out to ensure they require deployers to opt-in for each change. To
# opt in for one of the changes below, simply uncomment the line and run the
# playbook. Deployers are strongly advised to review the documentation for
# these changes and review their systems to ensure these changes won't cause
# service disruptions.
#
# V-38642 - Set umask for daemons in init scripts to 027 or 022
#security_umask_daemons_init: 027                 # V-38642
#
# V-38645 - System default umask in /etc/login.defs must be 077
#security_umask_login_defs: 077                   # V-38645
#
# V-38649 - System default umask for csh must be 077
#security_umask_csh: 077                          # V-38649
#
# V-38651 - System default umask for bash must be 077
#security_umask_bash: 077                         # V-38651

## Unattended upgrades (APT) configuration
security_unattended_upgrades_enabled: false
security_unattended_upgrades_notifications: false





**Modificato dall'autore il 31.07.2017 13:13**
Please consider the environment before printing this message, 50% of the above is useless!
Avatar
☺
Scritto da
il 2017-07-31 12:52:04.0 alle 2017-07-31 12:52:04.0
Trollate totali: 6374
nginx layer 7 firewall
interesting. voi avete qualcosa del genere?

Please consider the environment before printing this message, 50% of the above is useless!
Avatar
☺
Buco del culo
Scritto da
il 2017-07-31 12:44:34.0 alle 2017-07-31 12:44:34.0
Trollate totali: 6374
Re: RH (e di conseguenza derivati) sono impestati da codice CIA NSAbile?
Scritto da: Alessandrox
> Bene!
>
> Se posso identificare il buco del culo di linux, posso starne alla larga A bocca aperta Occhiolino

io avrei piu' paura di quello che fa la hacking team aiutando i carabinieri piuttosto che di quello che ha fatto fare l'NSA a qualche ingegnere redhat.



il tizio parlando dello stato di sorveglianza negli USA ad un certo punto deve menzionare le due ditte italiane specializzate nel fornire software di controllo e monitoraggio ai governi ed alle varie polizie nel mondo.
Please consider the environment before printing this message, 50% of the above is useless!
Avatar
Scritto da
Non Autenticato
il 2017-07-31 12:39:58.0 alle 2017-07-31 12:39:58.0
Re: nginx server block, aka virtualhosts + php-fpm unix socks = 403
Scritto da: dada216
> Scritto da: ::1
> > nginx da sempre 403 con fpm coi parametri di default.
> > Definisci la root nel blocco server e usa questo (col path opportuno del socket):
>
> gia' fatto, leggendomi la docu ho capito che cosa fosse fastcgi_params ed fastcgi_split_path_info erano necessari per passare da index.php a far girare gli script con i nomi e gli argomenti giusti sul fpm.
>
> Il problema e' che non va comunque, 403 sulla porta di mediawiki, 200 su quella di wordpress.
>
> In lacrime

Pappa pronta in arrivo tra tre, due, uno ...

giao frogione

Ad http://www.proott.com
sei proprio un frogio certificato‎
Avatar
Scritto da
Non Autenticato
il 2017-07-31 12:38:31.0 alle 2017-07-31 12:38:31.0
Re: Il testo di questa canzone
Scritto da:
> Scritto da:
> >
> >
> > si avvicina a ciò che intendo per poesia. Cose tipo
> >
> > Full many a gem of purest ray serene
> > the dark unfathom’d caves of ocean bear:
> > full many a flower is born to blush unseen,
> > and waste its sweetness on the desert air.

> >
> > oppure
> >
> > And now there came both mist and snow,
> > and it grew wondrous cold:
> > and ice, mast-high, came floating by,
> > as green as emerald.

> >
>
> Stracciala, ora ti insegno io cos'è la poesia.
>
>

quoto, sicuramente una pietra miliare.
Avatar
Buco del culo
Scritto da
Non Autenticato
il 2017-07-31 12:35:57.0 alle 2017-07-31 12:35:57.0
Re: RH (e di conseguenza derivati) sono impestati da codice CIA NSAbile?
Scritto da: Alessandrox
> Bene!
>
> Se posso identificare il buco del culo di linux, posso starne alla larga A bocca aperta Occhiolino

Alla larga da linucs o da RHEL?
Avatar
☺
Scritto da
il 2017-07-31 12:33:24.0 alle 2017-07-31 12:33:24.0
Trollate totali: 6374
Re: nginx server block, aka virtualhosts + php-fpm unix socks = 403
Scritto da: ::1
> nginx da sempre 403 con fpm coi parametri di default.
> Definisci la root nel blocco server e usa questo (col path opportuno del socket):

gia' fatto, leggendomi la docu ho capito che cosa fosse fastcgi_params ed fastcgi_split_path_info erano necessari per passare da index.php a far girare gli script con i nomi e gli argomenti giusti sul fpm.

Il problema e' che non va comunque, 403 sulla porta di mediawiki, 200 su quella di wordpress.

In lacrime
Please consider the environment before printing this message, 50% of the above is useless!

Pagina generata in 1125 millisecondi

Utenti attivi: 25 nell'ultimo minuto, 80 negli ultimi cinque minuti, 117 negli ultimi 15 minuti