Mostra notizie nelle discussioni
  • Avatar
    Scritto da
    Non Autenticato
    il 2010-03-26 20:34:00.0 alle 2010-03-26 20:34:00.0
    connessione wireless
    devo settarla

    dice per il Wep

    "WEP

    If you choose the WEP security option this device will ONLY operate in Legacy Wireless mode (802.11B/G). This means you will NOT get 11N performance due to the fact that WEP is not supported by the Draft 11N specification.

    WEP is the wireless encryption standard. To use it you must enter the same key(s) into the router and the wireless stations. For 64 bit keys you must enter 10 hex digits into each key box. For 128 bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. For the most secure use of WEP set the authentication type to "Shared Key" when WEP is enabled.

    You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64 bit keys, and a maximum of 13 characters for 128 bit keys.
    WEP Key Length :     (The length applies to all keys)
    WEP Key 1 :     
    WEP Key 2 :     
    WEP Key 3 :     
    WEP Key 4 :     
    Authentication :     "



    e per il WPA

    "WPA

    WPA-Personal does not require an autherntication server.The WPA-Enterprise option requires an external RADIUS server
    WPA Mode :     
    Group Key Update Interval :     (ms) "

    e

    WPA2

    "WPA-Personal does not require an autherntication server.The WPA-Enterprise option requires an external RADIUS server
    WPA Mode :     
    Group Key Update Interval :     (ms) "


    che devo fare?

    dice che il WEP non supporta Draft 11N che vuol dire?

    • Avatar
      Scritto da
      Non Autenticato
      il 2010-03-26 20:41:00.0 alle 2010-03-26 20:41:00.0
      Re: connessione wireless
      Il protocollo WEP non è stato progettato per rendere una rete inespugnabile, ma semplicemente per creare una WLAN con un livello di sicurezza e privacy paragonabile a quello che ci si aspetta da una LAN via cavo. É chiaramente indicato dal suo nome esteso: "Wired Equivalent Privacy". Recuperare una chiave WEP equivale, quindi, ad ottenere accesso fisico ad una rete via cavo; quello che succede dopo dipende dalle procedure impiegate per mettere al sicuro le risorse collegate alla rete stessa.
      Per garantire un minimo di sicurezza alle proprie LAN wireless, le grandi società hanno da sempre utilizzato sistemi di identificazione e qualche volta VPN; sfortunatamente, molte realtà casalinghe e di piccole società non dispongono delle capacità, degli equipaggiamenti, delle conoscenze o del più fondamentale desiderio di controllare gli accessi alla propria rete tramite autenticazione.
      Come abbiamo detto all'inizio, è cambiato molto da quando abbiamo scritto la prima versione di questo articolo. Gli strumenti a disposizione sono stati migliorati e resi più potenti, come può confermare chiunque abbia utilizzato il pacchetto di strumenti aircrack.
      Anche il panorama wireless è cambiato nel tempo. Gli utenti finalmente si muovono verso sicurezze WPA e WPA2, invece che WEP; questa tendenza potrebbe effettivamente accelerare col passaggio al Draft 11n, che da le migliori prestazioni con WPA2, mentre quando si usa WEP non regge il passo delle velocità di 802.11g. Anche gli utenti che non si sono ancora spostati a WPA/WPA2 utilizzano almeno WEP; sembrerebbe quindi che stiano ascoltando tutti i nostri avvertimenti.
      Siamo sicuri che nessuno dei lettori di Tom's Hardware sia così sprovveduto da utilizzare WEP, specialmente perché rompere chiavi WEP non è una possibilità nata oggi. Pensate però ai vostri amici e familiari, forse non sono a conoscenza delle limitazioni della crittografia che hanno scelto, alcuni potrebbero persino ignorare il fatto che un minimo di crittografia è necessaria. Abbiamo fatto abbastanza esperimenti nei nostri laboratori per poter dire che la metà delle reti wireless WEP rivelate nei dintorni funziona sullo stesso hardware, non più vecchio di un anno, venduto dalla più grossa compagnia di banda larga del paese.
    • Avatar
      Scritto da
      Non Autenticato
      il 2010-03-26 20:42:00.0 alle 2010-03-26 20:42:00.0
      Re: connessione wireless
      WPA

      mi da due opzioni

      WPA Enterprise

      "WPA

      WPA-Personal does not require an autherntication server.The WPA-Enterprise option requires an external RADIUS server
      WPA Mode :     
      Group Key Update Interval :     (ms)
      WPA2

      WPA-Personal does not require an autherntication server.The WPA-Enterprise option requires an external RADIUS server
      WPA Mode :     
      Group Key Update Interval :     (ms)
      AUTO (WPA OR WPA2)

      WPA-Personal does not require an autherntication server.The WPA-Enterprise option requires an external RADIUS server
      WPA Mode :     
      Group Key Update Interval :     (ms)
      Pre-Shared Key
      Pre-Shared Key :     
      EAP (802.1x)

      When WPA enterprise is enabled, the router uses EAP (802.1x) to authenticate clients via a remote RADIUS server.
      Authentication Timeout :     (ms)
      RADIUS server IP Address :     
      RADIUS Port :     
      RADIUS key :     "


      e WPA PSK (Personal)

      "WPA

      WPA-Personal does not require an autherntication server.The WPA-Enterprise option requires an external RADIUS server
      WPA Mode :     
      Group Key Update Interval :     (ms)

      Pre-Shared Key
      Pre-Shared Key :"
    • Avatar
      Scritto da
      Non Autenticato
      il 2010-03-26 21:21:00.0 alle 2010-03-26 21:21:00.0
      Significa: tirare la catena

      - Scritto da:
      > devo settarla
      >
      > dice per il Wep
      >
      > "WEP
      >
      > If you choose the WEP security option this device
      > will ONLY operate in Legacy Wireless mode
      > (802.11B/G). This means you will NOT get 11N
      > performance due to the fact that WEP is not
      > supported by the Draft 11N
      > specification.
      >
      > WEP is the wireless encryption standard. To use
      > it you must enter the same key(s) into the router
      > and the wireless stations. For 64 bit keys you
      > must enter 10 hex digits into each key box. For
      > 128 bit keys you must enter 26 hex digits into
      > each key box. A hex digit is either a number from
      > 0 to 9 or a letter from A to F. For the most
      > secure use of WEP set the authentication type to
      > "Shared Key" when WEP is
      > enabled.
      >
      > You may also enter any text string into a WEP key
      > box, in which case it will be converted into a
      > hexadecimal key using the ASCII values of the
      > characters. A maximum of 5 text characters can be
      > entered for 64 bit keys, and a maximum of 13
      > characters for 128 bit
      > keys.
      > WEP Key Length :     (The length applies to all keys)
      > WEP Key 1 :     
      > WEP Key 2 :     
      > WEP Key 3 :     
      > WEP Key 4 :     
      > Authentication :     "
      >
      >
      >
      > e per il WPA
      >
      > "WPA
      >
      > WPA-Personal does not require an autherntication
      > server.The WPA-Enterprise option requires an
      > external RADIUS
      > server
      > WPA Mode :     
      > Group Key Update Interval :     (ms) "
      >
      > e
      >
      > WPA2
      >
      > "WPA-Personal does not require an autherntication
      > server.The WPA-Enterprise option requires an
      > external RADIUS
      > server
      > WPA Mode :     
      > Group Key Update Interval :     (ms) "
      >
      >
      > che devo fare?
      >
      > dice che il WEP non supporta Draft 11N che vuol
      > dire?
      >

      Immagine postata dall'utente
<softv>

Pagina generata in 29 millisecondi

Utenti attivi: 27 nell'ultimo minuto, 72 negli ultimi cinque minuti, 123 negli ultimi 15 minuti